 |
|
Arcspray 140GP
|
|
|
 |
| |
The Metallisation Arc 140GP is an
economical electric drive unit option for the lightweight,
long reach Arc140 system, offering excellent flexibility
for difficult to access areas. The patented ‘Syncrodrive’
system means there is no motor in the pistol, and unique
constant geometry (CG) head ensures smooth and consistent
spray quality. A push/pull wire feed system gives reliable
wire feed up to 20m from the wire dispenser. Ideal for
anti-corrosion and engineering coatings, the Arc 140GP
is compatible with all standard Arc 140 accessories such
as extensions, Arcbeam and Purecoat. |
| |
|
| |
Typical Applications:
Structural steelwork
Pylons
Boilers
Lock gates
Oil rigs and flare booms
Tanks and vessels
Military vehicles
Ships and yachts
Decorative steelwork and resin mouldings
Fences/gates
Bridges (steel and concrete)
Engineering bond coats
Wear coatings
|
|
| |
Features:
NEW Sealed/lubed for life motor for added reliability
Air-cooled cables
Good pistol manoeuvrability
Easy to maintain
Soft start for smooth start ups
Uses wires from 1.6-2.5mm dia. without changing feed rollers
Choice of coating textures
Low running costs
Safety interlocks
Steel reinforced conduits
Remote wire dispense via trolley, reel dispenser, coil
dispenser or drums
250, 300 and 450 amp energisers available (Pistol rated
at 350amps) |
|
|
Typical Performance Data
|
Material
|
Reference
|
Wire
Diameter
|
Maximum
Throughput
kgs/hr
|
Maximum
Coverage
m²/kg/100µm
|
| Zinc |
02E |
2.0mm |
36 |
0.82 |
| 2.3mm |
Aluminium &
Aluminum Alloys |
01E/17E/25E |
2.0mm |
8.5 |
2.88 |
| 2.3mm |
Zinc/Aluminium
85/15 |
21E |
2.0mm |
31 |
1.00 |
| 2.3mm |
Throughput is independent of wire diameter: preferred
diameter shown bold.
Throughput based on standard spray parameters with Metallisation
wires at
spraying current of 300AMPS and 350AMPS (shown in italics) |
Click
here for information on the Arcspray 140GP System.
You will need Adobe
Acrobat Reader
Other Arcspray Equipment:
|
|
|
|
|
