Flowmeters and Mounting Panel
Use with Metallisation regulators to ensure correct mixture
of acetylene and oxygen is fed to the pistol to give the optimum
flame.
Mounted in protective steel and perspex case to provide protection
in industrial environments.
Standard left hand threads for fuel gas (acetylene) to avoid
incorrect connection.
Large floats, indicators and scale divisions offer good visibility
at a distance.
Used as primary diagnosis tool for fault finding.
Flamespray mounting panel (pictured) offers a convenient method
of mounting all the required ancillaries. |
| |
| |
Gas and Oxygen Regulators
Use together with Metallisation flowmeters and flame arrestors.
Comply with BS5741 and IS02503 standards. |
| |
| |
 Air
Regulation and Filtration Unit
The ARF unit is made up of a filter bowl, lubricator, regulator
and 500mm hose to connect to the breathing air pack.
High flow and regulation characteristics suitable for flame
spray applications.
Single supply feeds drive motor, nozzle and breathing air pack.
Drive motor supply is lubricated to protect motor from corrosion.
Nozzle air is unlubricated to ensure clean, uncontaminated coatings.
Breathing air pack supply is also unlubricated.
Snap-lock facility on regulator and lubricator to prevent accidental
changes to settings.
Strainer on lubricator ensures clean oil in the fog generator.
All service parts can be changed without disconnecting hoses
for ease of cleaning and maintenance.
Filter bowls have large filter elements for minimum pressure
drop.
Filter bowls have sight glasses to prompt the operator to clean
bowls. |
| |
| |
Flame Arrestors
The flame arrestors are designed as a regulator mounted unit
to protect the operator, regulator/manifold and gas supply from
flashbacks.
Use together with Metallisation regulators and hoses with check
valves for maximum safety.
Mount to the regulator.
Sintered metal flame arrestor quenches the flame front resulting
from a flashback..
Pressure relief valve safely vents excess pressure and fumes.
Pressure sensitive cut-off valve, incorporating a tamper-proof
reset mechanism prevents the re-ignition of unburnt gases after
a flashback. |
Wire Swift
Wire tripod base giving stability and strength.
Ball race thrust bearing for continued free rotation.
Easily adjusted wire retention arms which may be used for dispensing
from coils or removed for dispensing from MIG or LAYER reels.
Ability to carry wire coils of diameters from 10" (250mm)
- 30" (750mm) inside diameter.
Provision for a wire straightener for stiff materials such as
1/8" steels etc.
Adjustable brake preventing over-run of wires.
All engineering and anti-corrosion wires are available in either
coil or reel formats. |
| |
| |
Wire Dispensing Cone
The Metallisation wire dispensing cone offers the ability to
conveniently dispense anti-corrosion wires from production packs
(drums). The wire is neatly guided to a dispense point, then
over the pulley to give a free passage of wire from the drum
to pistol.
Reduces snagging of wire against edge of drum when dispensing.
Fits standard 250kg and 125kg production packs.
Covers wire to minimise dust and moisture contamination.
Reduces kinking of wire when pulling from drum.
Reduces load on pistol drive system which increases the life
on the motor and reduces wear on the rollers.
- Production packs available as standard for the following materials:
- Zinc – 1.6mm, 2mm, 2.3mm, 3mm, 4mm, 1/8” and
3/16”
- Aluminium – 1.6mm, 2mm and 2.3mm
- Zinc/Aluminium 85/15 - 1.6mm, 2mm, 2.3mm, 3mm, 1/8”
& 3/16”
- Tin/Zinc 80/20 – 2mm
- Tin/Zinc 70/30 – 2mm
|
| |
|
Other Flamespray Equipment:
|
